상품명 | [Brand GmBH] 피펫 리크 테스터 Pipetter Leak Testing Unit, PLT Unit |
---|---|
품명 | Pipetter Leak Testing Unit, PLT Unit |
판매가 | 3,347,800원 (부가세포함) |
제조사 | Brand GmBH |
모델 | 703970 |
배송비 | 4,000원 (110,000원 이상 구매 시 무료) |
QR코드 | |
배송기간 | 3일 이내 (영업일기준) |
수량 |
Pipetter Leak Testing Unit, PLT Unit
피펫 리크 테스터
■ 1 ul ~ 10 ml 까지의 Single 또는 Multichannel Pipet의 Leak Testing용
(Air-displacement Pipettes)
■ 피펫 내부 Piston Seal 또는 Tip Cone의 Damage를 점검 할 수 있음
■ Regular Gravimetic Calibration 사이의 Safeguard로서 Daily Pipette Check용
■ Brand만의 특허 기술로 얻을 수 있는 결과를 보여줌
■ Testing With and Without Tips
■ Test Result in Seconds
■ 구성 : 1 Channel Pipet Adapter (With Tip Mounted, without Tip 각 1개),
2 Plugs, 3 PE Filter for Pipet Adapters, AC Adapter,
Quality Certificate Manual
■ Brand GmBH
Leak Rate and Their Detection
The leak rate is a measure of the quantity of material that flows through a leak
per time unit. For air-displacement pipettes the PLT unit determines the rate
through a differential pressure measurement, i.e., after creating a negative
pressure, the pressure rise over a given time is measured.
▪ Complex Determinations
The leak rate is determined by considering complex physical relationships.
Calculation of the limit values resident in the PLT must include factors such as
the dead volume of the pipette/tip system, flow cross-setion of the pipette tip,
pressure rise per time unit, pipette volume and type, etc.
▪ The pV Value
The pV value is the product of the pressure and the volume of a certain quantity of
a gas at the prevailing temperature. This is a measure of the quantity of material
or the mass of the gas.
▪ The Leak Rate QL
The leak rate QL is the ratio of the pV value and the period of time during
which the gas flows through a path cross-section.
▪ The volume loss
For the pipette test, hPa ml/s is a suitable unit for the leak rate. A leak rate of e.g.,
1 hPa ml/s at an air pressure of 1000 hPa means a volume loss of about 1 ul/s.
Model | Description |
703970 | PLT Unit |
1-Channel Pipet Adapter
Model | Description |
703975 | For Pipet with Tip① |
703976 | For Pipet without Tip② |
● 1 Plug 포함
4-Channel Pipet Adapter
Model | Description |
703977 | For Multichannel Pipet③ |
● For Multichannel Pipette With and Without Tip
● 4 Plugs 포함
Filter for Pipette Adapter
Model | Description |
703978 | PE Filter④ |
Universal AC Adapter
Model | Description |
703979 | Universal AC Adapter⑤ |
● AC 100V ~ 240V, 50/60 Hz
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등
정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지
않은 주문은 자동취소 됩니다.
배송 방법 : 택배
배송 지역 : 전국지역
배송 비용 : 4,000원
배송 기간 : 2일 ~ 45일
배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
교환 및 반품이 가능한 경우